TUTORIAL

Lighting Control

1. How to Operate the  neusmart-logo black2-nbg app for the first time?

Go to “Operations’

Tap “Add New Network”

Create a “New Name” for the New Network and press “OK”

Tap on the “New Name” located on the top right hand corner which would bring the user to the “Network List”

Select the “New Name” and tap “Back” to return to the menu page

Once the New Network is setup, tap “Search for New Devices” in order to pair  neusmart-logo black2-nbgdevices

2. Pairing a NEW  neusmart-logo black2-nbg downlight/tubelight

Go to “Operations’

Tap “Search for New Devices” in order to pair  neusmart-logo black2-nbgdownlight/tubelight

The app will search for any  neusmart-logo black2-nbgdownlight/tubelight available.

Once found, click on the  icon1  icon to pair and add devices.

All new devices that have been paired and added will now be available at the main Menu page

3. How do I Reset the  neusmart-logo black2-nbg downlight/tubelight?

To reset the  neusmart-logo black2-nbgdownlight/tubelight, they require power to be fully lost before they’ll reset. The capacitor in the  neusmart-logo black2-nbgdownlight/tubelight requires a small delay for the power to completely be lost.

You’ll need to turn the switch off/on five times, but leave the switch in the off position for about 2 seconds, then turn on, and as soon as light comes on immediately turn off again and repeat.

Repeat this five times. This pattern will trigger the  neusmart-logo black2-nbgdownlight/tubelight to reset:

1. Turn off – count 1, 2, turn on

2. Turn off – count 1, 2, turn on

3. Turn off – count 1, 2, turn on

4. Turn off – count 1, 2, turn on

5. Turn off – count 1, 2, turn on

When the  neusmart-logo black2-nbgdownlight/tubelight is reset, it will begin to turn a series of colors, and then finally, will turn a bright white.  Your  neusmart-logo black2-nbgdownlight/tubelight is now reset! To pair the  neusmart-logo black2-nbgdownlight/tubelight with the app, go to “Operations” and select “Search New Devices.”

4. How to Create Groups

Whether you want to control 1, 2, 10 or 50 pieces of  neusmart-logo black2-nbgdownlight/tubelight, the  neusmart-logo black2-nbgapp gives the user an advanced wireless lighting control system to flexibly control all of your  neusmart-logo black2-nbgdownlight/tubelight. You can control multiple  neusmart-logo black2-nbgdownlight/tubelight at the same time as a group. This is how to create groups:

Go to “Device Management”

Tap on “Create Group”

Tap on “Group 1” after it is created

Tap on the  icon1  icon to add the selected  neusmart-logo black2-nbgdownlight/tubelight into “Group 1”

Once finished, tap the  icon2  icon twice to return to main Menu page

5. Rename, Delete, Restore  neusmart-logo black2-nbg downlight/tubelight or Group

a. To Rename the  neusmart-logo black2-nbgdownlight/tubelight

In the main Menu page, tap on the selected  neusmart-logo black2-nbgdownlight/tubelight. You will enter into the selected  neusmart-logo black2-nbgdownlight/tubelight page as indicated below:

img03

Tap on the word “LightRGBCW 0” which is located at the bottom of the  icon4  icon and the user can start to rename the selected  neusmart-logo black2-nbgdownlight/tubelight

b. To Rename a Group

In the main Menu page, tap on “Device Management”

Tap on the selected Group and you will go to the “Group Edit” page

Tap on the word “Group 1” which is located next to the  icon5  icon and rename the Group accordingly.

c. To delete the  neusmart-logo black2-nbgdownlight/tubelight or Group

i. To Delete Group

Go to “Device Management”

Tap on the edit  icon6  icon on the top right corner and the icon will change to a delete  icon7  icon.

Tap on the selected group  icon5  icon you want to remove/delete and you will see the following image:

img04

Tap on the  icon9  icon and the selected group would be removed. Successful removal of the Group will see the following image below:

icon8

Please note: Group can only be deleted if there are no  neusmart-logo black2-nbgdevices in that particular group regardless whether in an online or offline status. Group CANNOT be deleted if there are  neusmart-logo black2-nbgdevices in the group notwithstanding whether these devices are online or offline.

ii. To Delete individual  neusmart-logo black2-nbg downlight/tubelight

Go to “Device Management”

Tap on the edit icon6 icon on the top right corner and the icon will change to a delete icon7 icon

Tap on the selected light icon1 icon you want to remove/delete and you will see the following image:

ii. To Delete individual  neusmart-logo black2-nbgdownlight/tubelight

Go to “Device Management”

Tap on the edit  icon6  icon on the top right corner and the icon will change to a delete  icon7  icon

Tap on the selected light  icon1  icon you want to remove/delete and you will see the following image:

img04

Tap on the  icon1  icon and the following image will appear below:

img6

Tap on “Mandatory Delete” to delete the selected  neusmart-logo black2-nbgdownlight/tubelight. Successful removal of the  neusmart-logo black2-nbgdownlight/tubelight will see the following image below:

img7

Please noteThere are 2 delete options available. The “Mandatary Delete” option will permanently erase all existing configuration information and can be executed even when the  neusmart-logo black2-nbgdevices are offline. The “Delete” option will only erase the  neusmart-logo black2-nbgdevices from the “Device Management” and can be executed ONLY when the  neusmart-logo black2-nbgdevices are online. All  neusmart-logo black2-nbgdevices that are located in the “Device Management” page, once deleted (regardless if you use either “Mandatory Delete” or the “Delete” function) will not be able to be restored back.

d. To Restore the neusmart-logo black2-nbgdownlight/tubelight that has been removed

Under the “Device Management” page, tap on any selected Groupimg8 icon and you would be directed to the “Group Edit” page (Note:  neusmart-logo black2-nbgdevices have to be in an online status before you can edit the devices in the “Group Edit” page)

All  neusmart-logo black2-nbgdevices removed in the “Group Edit” page can still be found in the “Device Not Added” section. If you want to restore the just recently removed neusmart-logo black2-nbgdevice, just tap on the recently removed neusmart-logo black2-nbgdevice found in the “Device Not Added” section and add it. The recently removed neusmart-logo black2-nbgdevice will now be restored to original position in the Group.

6. To Delete Names from Network List

To go to Network List, tap on the “Network Name Created” which is located at the top right hand corner of the main Menu page which is shown below:

img1

At the “Network List” page, slide your finger from right to left on the names of Network created which you want to delete as appended below:

img2

Tap on “Delete” to delete the Network name created from the List

7. Updating  neusmart-logo black2-nbg Firmware

neusmart-logo black2-nbgdevices are smart, but you can make them smarter by updating your  neusmart-logo black2-nbgFirmware! We will periodically improve the firmware of your  neusmart-logo black2-nbgdevices and it’s important to keep your  neusmart-logo black2-nbgapp up-to-date.

When a new Firmware update is available, a message will appear on your smartphone notifying you of the new Firmware update. Follow the instructions to update the Firmware.

8. Theme

The Theme features provide users with various theme settings on their  neusmart-logo black2-nbgDownlight/tubelight that changes color and pulse according to the different theme selected.

9. Vacation Mode

Use the Vacation Experience to make it look like someone’s still home even if you’re not. Set the start and end time as well as the repetition cycle (Monday to Sunday) and the  neusmart-logo black2-nbgdownlight/tubelight will do the rest, turning on and off randomly throughout the evening. The neighbors will think you never leave.

How Do I Activate This Feature?

1. On the menu page, tap on the selected  neusmart-logo black2-nbgdownlight/tubelight which you want to activate this feature.

2. Tap the Features img9 icon in the top right hand corner of the screen to go to the “Feature” page and select “Vacation”.

3. In the “Vacation” page, tap the plus sign (+) in the top right hand corner to go into Vacation settings.

4. Proceed with selecting your custom Vacation settings – the Start/End Time and the repetition cycle from Monday to Sunday.

5. Tap on “Execute” to choose the various operating options of the selected  neusmart-logo black2-nbgdownlight/tubelight.

6. Tap on “OK” to save and activate the Vacation Feature. The saved settings will be shown in the “Vacation” page of the app.

What Should I Expect When Using Vacation

The  neusmart-logo black2-nbgdownlight/tubelight will operate according to the saved settings selected in the Vacation Feature and simulates a normal activity of lights being on while someone is home.

10. Sunrise & Sunset

Schedule the Sunrise & Sunset Experience to wake up on the brighter side with your own personalized sunrise to start your day or sleep soundly with the lights turn off automatically without the need to get out of bed to switch off the light. Schedule the time and days of the week to repeat this feature

How Do I Activate This Feature?

1. On the menu page, tap on the selected  neusmart-logo black2-nbgdownlight/tubelight which you want to activate this feature.

2. Tap the Features img9 icon in the top right hand corner of the screen to go to the “Feature” page and select “Sunrise & Sunset”.

3. In the “Sunrise & Sunset” page, tap the either the sunrise img11 icon or the sunset img12 icon to go into “Settings”.

4. Proceed with selecting your custom Sunrise/Sunset settings – the time for sunrise/sunset, the duration of the sunrise/sunset and the repetition cycle from Monday to Sunday.

5. Tap on “OK” to save and activate the Sunrise/Sunset Feature. The saved settings will be shown in the “Sunrise/Sunset” page of the app.

What Should I Expect When Using Sunrise & Sunset

While Sunrise is active, your  neusmart-logo black2-nbgdownlight/tubelight will slowly turn on, beginning at the alarm’s start time. Over the course of between 1-30 minutes (depending on the number of minutes selected), the neusmart-logo black2-nbgLED downlight/tubelight will gradually become brighter to ease you from your restful sleep to the waking world, until finally, neusmart-logo black2-nbgwill end the sunrise experience once the neusmart-logo black2-nbg LED downlight/tubelight is fully brighten up. On the other hand, when Sunset is activated, your neusmart-logo black2-nbgdownlight/tubelight will slowly turn off, ending with the time you set the schedule to turn off the lights enabling you to slowly drift off in sleep without any interruption and abate the need to get up and switch off the lights yourself.

11. Music Sync

Ramp up the festivities with the Music Sync Experience. Just like it sounds, play your favorite tunes and your neusmart-logo black2-nbgdownlight/tubelight will move to the beat.

How Do I Activate This Feature?

1. On the menu page, tap on the selected  neusmart-logo black2-nbgdownlight/tubelight which you want to activate this feature.

2. Tap the Features img9 icon in the top right hand corner of the screen to go to the “Feature” page and select “Music”.

3. In the “Music” page, select the music you want to play and tap on the Play img14 icon.

4. The selected  neusmart-logo black2-nbgdownlight/tubelight will start to change color and pulse according to the beat of the music.

12. Shake

Shake your device to change the color randomly of the  neusmart-logo black2-nbgdownlight/tubelight.